2000W Cnc Gantry Optical Fiber Laser Cutting Machine
Fiber source with excellent stable performance and service life of 100,000 hours.
Send Inquiry
Product Details of2000W Cnc Gantry Optical Fiber Laser Cutting Machine
Product Introduction:
The machine adopt the excellent performence transmission and servo motor and suitable for cutting various metals.
At the same time, the machine has the advantages such as Low cost, Free laser maintenance , high speed and high efficiency.
Technical Parameters:
Machine Model | CG-3015 |
Working area | 3000mm*1500mm（Optional） |
Laser power | 1000W~6000W |
Repeat positioning accuracy | ±0.02mm |
Max. acceleration | 1.0G |
Maximum speed | 90m/min |
Specified voltage and Frequency | 380V 50Hz/60Hz/60A |
Color | White +Gray |
Logo | Customized Service |
Z Travel | 100mm |
Fiber Laser Cutting Machine Configuration: standard suitable for 2000W 3000W
Laser Source: MAX/RAYCUS 2000W/3000W
Cutting Head: Raytools auto focus cutting head BM111
Control System: CYPCUT controller FS2000
Servo motor: Japan Yaskawa Y: 1300W Y:1300W X: 850W Z:400W
Dual-temperature: S&A/Hanli cooling system;
Guide rail : PMI guide rail
Rack: APEX /YYC rack
Machine bed: Heat treated heavy sheet welding machine bed;
Gantry : Aluminium gantry
Reducer: MOTOVARIO reducer
Automatic lubrication system
Computer: Industry computer
Transmission and Precision:
CG Fiber laser cutting machine is equipped with Japan YASKAWA Servo Motor, France MOTOVARIO reducer. It makes sure that the machine positioning accuracy is ±0.02mm,and the cutting acceleration is 1.0G. The service life is more than 10 years.
Key Parts:
Aviation Aluminum Gantry:
The beam is made of high-strength aluminum alloy, rough machined after heat treatment, and treated with secondary vibration caused by vibration isolation to ensure the overall strength, stiffness and stability of the beam.
Segmented Rectangular Welded Bed:
The lathe bed adopts an integral welding structure. The specaltreatment ,such as the stree relief annealing treatment and so on, can well resolve the stree problems caused by welding and greatly improve the stability of the machine tool.
Cutting Head:
High adjustment accuracy, adjustment range + 10mm ~ - 12mm, accuracy ≤ 50" μ m. It is applicable to 0 ~ 20mm different types of plates.
Complete the rapid perforation of thick plates and automatic cutting of plates with different thicknesses and materials
The optical and water-cooled design is optimized, so that the laser head can work stably for a long time at high power
Servo Driver and Motor-YASKAWA:
The machine adopts Japanese Yaskawa servo motor and drive
6000r / min.Powerful torque and power
greatly improve the cutting efficiency. At the same time, it has extremely accurate positioning accuracy and long service life.The main electrical accessories are Schneider and Siemens, reasonable line connection and optimization. Ensure a very low failure rate.
Gear and Rack-Taiwan Apex:
-High precision
-Strong load bearing capacity
-High speed
-Low noise
-Long service life
Cutting Samples
This Fiber Laser Cutting machine: Laser Cutting machine is widely used in cutting and shaping for metal plates, pipes (pipe cutting plus pipe cutting device can be), stainless steel, carbon steel, galvanized sheet, electrolytic plate, brass plate, aluminum plate, manganese steel, all kinds of alloy plates, rare metals etc.
Hot Tags: 2000w cnc gantry optical fiber laser cutting machine, China 2000w cnc gantry optical fiber laser cutting machine manufacturers, suppliers, factory
Send Inquiry
